Ji a

P526

User Manual

E5125

First Edition May 2007

Copyright © 2007 ASUSTeK Computers, Inc. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUS Telecom (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE

FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Table of Contents

P526 specifications Package contents

Chapter 1: Getting started Getting to know your P526 Layout Device components description Getting your device ready Installing the SIM card and battery Charging the battery Starting up Powering your device Using the stylus Calibrating P526 Locking the keys and buttons The Today screen Status indicators Screen orientation Start menu

Chapter 2: Entering data Using the Input Panel Using the Block Recognizer Using the On-screen keyboard Using the Letter Recognizer Using T9 input Using the Transcriber Writing and drawing on the screen Recording voice Using ActiveSync™ Synchronizing via mini-USB Synchronizing with Exchange Server Setting the synchronization schedule Searching information Getting Help

Chapter 3: Phone features Using phone Phone pad

Adjusting the volume

Making a call Using the alphanumeric keypad Making calls from Contacts Making calls from Call History

Using the Speed Dial Using Voice Commander

Receiving a call

Chapter 4: Wireless features Using the Wireless Manager Using Bluetooth®

Overview

Activating Bluetooth in your device Setting a GPRS connection

Connecting GPRS

Disconnecting GPRS

Using the GPRS Tool

Chapter 5: Multimedia features Using the camera Launching the camera Camera mode screen

Taking photos Video mode screen Recording videos

Viewing pictures and videos Viewing pictures and videos

Chapter 6: Other features

ASUS Launcher

Using the ASUS Launcher ASUS CallFilter

Launching ASUS CallFilter

Using ASUS CallFilter Remote Presenter

Using the Remote Presenter Windows Live™

Signing up Meeting Time Planner Setting ring tone

Adding ring tone to selection

Changing the ring tone Wake-up setting Mode switcher System information Restoring default factory settings

Chapter 7: Device component status ASUS status icon USB setting LCD Brightness

Battery

Storage card memory Programs running in memory

Settings

Notices Contact information

P526 specifications

TI OMAP 850 Microsoft® Windows Mobile™ 6

128 MB NAND Flash ROM 64 MB SDRAM

2.6-inch, 320 x 240 TFT Touchscreen Liquid Crystal Display (LCD) with 65,536 color and LED back-lighting

Quad-band GSM (850/900/1800/1900 MHz) Integrated GSM/GPRS/EDGE and GPS with internal antenna

Built-in SiRF star Ill chipset Class B, Multislot class 10 2.0 mega-pixel fixed focus camera

Bluetooth : V1.2 USB : USB Client 1.1

1300 mAh Lithium lon MicroSD card slot

2.5 mm audio port Built-in microphone and stereo output speaker

115g (with battery) 110 x 58 x 15.4 mm 4 hrs (*vary with different networking environment and scenario)

150 hrs (*vary with different networking environment and scenario)

NOTE: Specifications are subject to change without notice.

Check your P526 package for the following items:

v ASUS P526 device

v Battery

v AC Adapter

v Mini-USB cable

v Headset

v Stylus

v Car cell phone charger v Car Kit (PDA holder and windshield suction pedestal) v Protection case

v Getting Started CD

v User Manual

v Quick Start Guide

v Warranty Card

NOTE: If any of the above items is damaged or missing, contact your retailer.

CAUTION:

e To reduce risk of fire, use only correct battery type. Refer to “Installing the SIM card and battery” section for details. e Do not attempt to disassemble the battery pack.

e Dispose of used batteries properly. Inquire from local authorities for proper disposal of battery.

Chapter

Getting started

e Getting to know your P526 e Getting your device ready e Starting up

e The Today screen

‘Getting to know your P526

Components: @ Power button

Ae `> @ -09 cial

SY © Notification LED

@ Earpiece receiver

O LCD touch screen

Left Soft key

= | @ start button

a © Voice Commander/Record button D Right Soft key

@ call key

B End key

® Mode switcher button

D Alphanumeric keypad

15) Clear key

O Mic

Layout

Top features

i MY Hi |

a

PC

Left side features Front features

Getting to know your P526

Components:

D GPS antenna connector Stereo speaker

® Camera lens

a) Battery compartment Ø) Hold button

@ Camera button

) Reset button

24) MicroSD slot

a Stylus 26) Headphone slot 27) Mini-USB connector

Rear features Right side features

Bottom features

Item

Power button

Jog dial

OK button

Notification LED

Earpiece receiver

LCD touch screen

Left Soft key Start button

Voice Commander/Record button

Right Soft key

Call key

End key

Mode/Task Switcher button

Device components description

Description

Press once to set suspend mode or to wake device from sleep mode. Press and hold to turn the power ON or OFF.

This three-direction jog dial allows you to conveniently navigate through menus without necessarily using the stylus.

Press to confirm a command or press to close/exit an open application.

This multi-color LED notifies the following:

¢ Green - Phone fully charged.

¢ Flashing green - Network detected.

e Red - Phone is charging.

¢ Flashing red - Event notification.

¢ Flashing blue - Bluetooth® or GPS is ON.

Allows you to listen to incoming/outgoing calls.

This 2.6-inch, 65,536-color, 240 x 320-resolution, touchscreen TFT LCD allows you to write, draw, or make selections using the stylus.

Performs the command indicated above the button. Press to launch the Start menu.

Press to launch the Voice Commander application. Press and hold to launch voice recording.

Performs the command indicated above the button. Press to receive an incoming call or to make a call. Press to end a call ora GPRS connection.

Allows you to switch applications and tasks.

Device components description

No. | | EA Alphanumeric keypad Allows you to input text and numbers.

Clear key Press to clear input character to the left.

Mic Used to make or receive phone calls, record sounds, record voice, or say voice commands.

GPS antenna connector Allows you to install an external GPS antenna for better signal reception.

Stereo speaker Allows you to listen audio media and phone calls.

Camera lens 2-megapixel fixed lens for taking pictures.

Battery compartment Contains the battery that supplies power to the device.

Hold button Slide to enable or disable all keys including the LCD touch screen.

Camera button Press and hold over three seconds to launch the camera. In camera mode, press to take a picture. In video mode, press to start recording video and press again to stop.

23 Reset button Using the stylus, press reset button to soft-reset your device. 24 ~=Micro-SD slot Insert a Micro-SD storage card into this slot. 25 Stylus Use the stylus to write, draw, or select items on the touch screen.

eo Oh rh _v—O3OXOClC

26 Earphone port Plug headset accessory to this port

ooo S” E 27 Mini-USB connector Use this connector to synchronize your data or to charge the battery.

Getting your device ready

Installing the SIM card and battery

Before you can make a phone call using your P526, you need to install a Subscriber Identity Module (SIM) card. A SIM card contains your phone number, subscriber details, phonebook, and additional phone memory.

Your P526 comes with a rechargeable Lithium-lon battery.

New batteries come partially discharged and should be fully charged before using them. They generally do not reach their rated capacity until they have been charged and discharged at least four (4) times. We recommend that new batteries be charged overnight even though they may indicate that the charge is complete after a few hours. Sometimes charging may stop during the initial charge and it is necessary to remove the battery for approximately fifteen (15) minutes and then put it back on charge.

CAUTION: Use only an ASUS qualified battery.

To install a SIM card and battery:

1. Remove the battery compartment cover.

NOTE: When turned on, the device automatically turns off after you open the battery compartment to prevent data loss.

2. Remove the battery.

3. Insert the SIM card with its gold contacts facing down and the notched corner oriented to the upper left corner of the slot as shown.

4. Replace the battery into the compartment with its copper contacts properly aligned to the copper conductor on the device.

5. Replace battery compartment cover.

Charging the battery The bundled battery pack is shipped partially charged. Charge the battery up to four (4) hours before using for the first time.

To charge battery: 1. Connect the AC adapter plug to the mini-USB connector at the bottom of the device.

2. Connect the AC power plug to a grounded wall socket or power strip.

NOTE: e The notification LED turns red and charging battery icon appears on the status bar indicating that the battery is

charging. e If your battery gets totally discharged, you need to recharge it for at least twenty minutes before you can turn it

back on.

Powering your device Make sure that your P526 is fully-charged before starting the device for the first time.

To turn on power: 1. Press and hold the power button.

Power button

2. Follow onscreen instructions to align screen and set the local time zone.

Using the stylus

The stylus is a pen-like device found behind the upper right corner of your P526. e Use the stylus to write, draw, select, or drag an item on the screen. ¢ Single-tap an item to select it. e Tap and hold an item to see a menu.

Calibrating P526

Calibrating your device ensures that the item you tap on the screen is activated. This involves tapping in the center of targets that appear in various coordinates on the screen.

To calibrate your screen:

1. Tap Start > Settings > System tab then tap Screen icon.

2. On the General tab tap Align Screen then follow succeeding calibration Age. ros

screen instructions. mana enbeniekibiieind ooo aos Md hod Pp

Locking the keys and buttons

You can lock the keys and buttons of your device to avoid inadvertently dialing numbers or launching any application. To lock the keys and buttons:

1. Locate the Hold button on the right side of your device. 2. Slide the hold button downward to lock.

3. To unlock, slide the hold button upward. Hold button

The Today screen

The Today screen displays information useful to you. You can configure the Today screen to have all the important information you need.

e To access the Today screen, tap Start > Today. e To personalize the Today screen, tap Start > Settings > Personal tab > Today.

The following describes the common information found on the today screen:

Tap to open the Start menu

Tap to setup date, time, and alarm

Tap to launch Wireless Manager

Tap to set user information Tap to open messages

Tap to setup profile

Tap to read or make appointments Tap to launch Live search engine

Tap to setup tasks

Tap to display call history

Status bar

Wednesday March 21, 2007

China Mobile

TERSIN

Ei here to set owner information ST a gees Ecte

Profile: Reel

Mo upcoming appointments

Ko tasks

aaru e

Indicates the battery status Tap to adjust volume

Displays the signal status

Tap to view connectivity status

Displays the Bluetooth® connection status

Tap to set Call Filter

Tap to display system CPU, USB setting, LCD brightness, battery, memory, and MicroSD status

Tap to change screen orientation

Tap to launch Contacts list

Status indicators Refer to the table below for the Today screen icon status indicators.

General Packet Radio Services (GPRS) available. Connecting via GPRS.

Connected via GPRS. Connecting with ActiveSync

ActiveSync connection not active.

ActiveSync synchronization in progress. Synchronization error.

Status indicators

G New voice mail.

No cellular phone service.

Searching for cellular phone service. Indicates signal strength.

Sound OFF. Sound ON. Battery low.

iq Battery extremely low. $ i T Battery partially charged.

r Battery charging. TIT Battery fully charged.

Status indicators

Searching Wi-Fi connection. Roaming service. This icon appears only if you have international roaming feature.

Vibrate or Meeting mode on. Bluetooth headset connected. Bluetooth head connected with sound.

Screen orientation

You can set the screen to three different orientations:

1. Portrait 2. Landscape

Set to Portrait mode to get a better view or better operation of certain applications on your device. Set to Landscape when viewing pictures, video or viewing longer text files.

To change the screen orientation, tap Start > Setting > System tab > Screen then select the

orientation you want.

You can also change the orientation by tapping the ma | icon.

ee ary arch 21, 207 Chew Mobile FERS EE A E) run ie T a Eal A E | Se E s] EE ii Bho tek

= (te |

mas tan)

Portrait mode

cr ee ry ae a ee ee F ed ti tt AET) W L e a a EE = a ar E E O Meia E e

ee ek

a a i

“Phone “PT

Landscape mode

Start menu The Start menu contains various programs and applications that you commonly use. Tap Start to display the start menu items:

Portrait mode Landscape mode

You can also customize the items that appear in the Start menu.

To do this: 1. Tap Start > Settings > Personal tab > Menus.

2. Select the check boxes of the items you want to appear in the Start menu. You can select up to seven (7) items.

Chapter

Entering data

e Using the Input Panel

e Writing and drawing on the screen

e Recording voice

e Using ActiveSync

e Synchronizing with Exchange Server e Searching information

e Getting Help

Using the Input Panel

When you start an application or select a field that requires text, symbols, or numbers, the Input Panel icon appears on the menu bar. The Input Panel allows you to select various input methods including: Block Recognizer, Keyboard, Letter Recognizer, and Transcriber.

Using the Block Recognizer

The Block Recognizer allows you to use a single stroke to write letters, numbers, symbols, or punctuations, which are converted into typed text.

To use the Block Recognizer: 1. In an application, tap the Input Panel arrow, then tap Block Recognizer.

2. Write letters, numbers, symbols, or punctuations in the designated writing area.

e Write letters on the abc (left) area of the box. e Write numbers on the 123 (right) area of the box.

e Tap the special symbols button to input symbols, punctuations and other special characters.

e Tap Help “?” button for help on how to write characters.

Tap for special characters

Input panel

Using the On-screen keyboard With the on-screen keyboard, you can input text, symbols, numbers, or other special characters when input is possible. To input text using the on-screen keyboard: 1. In an application, tap the Input Panel arrow, then tap Keyboard. 2. Input text by tapping keys on the on-screen keyboard.

Input panel

To enlarge the on-screen keyboard: 1. Tap the Input Panel arrow, then tap Option. 2. Select Keyboard from the Input Method list. 3. Tap Large Keys.

Using the Letter Recognizer With the Letter Recognizer you can write individual letters, numbers, or special characters, which are converted into typed text.

To use the Letter Recognizer: 1. In an application, tap the Input Panel arrow, then tap Letter Recognizer. 2. Write letters, numbers, symbols, or punctuations in the designated writing area. e Write capital letters on the ABC (left) area of the box. e Write lower case letters on the abc (middle) area of the box. ¢ Write numbers on the 123 (right) area of the box.

e Tap the special symbols button to input symbols, punctuations and other special characters.

¢ Tap Help “?” button for help on how to write characters.

Tap for special characters

Input panel

Using T9 input

T9 allows you to enter text in alpha-numeric format. As you key in alpha-numeric texts on the keypad, T9 automatically matches your input with most likely the completed word.

To switch to T9 input, tap the Input Panel arrow, then tap T9.

T9 input shortcuts

e To key in a word or number, tap the keys on the keypad. To insert a word or number from the word list:

a. Use jog dial to move highlighted bar on word list.

b. Press jog dial to add selected word or number.

c. Press I to delete previous character or highlighted text.

Word list

Alpha-numeric keypad

F Press to delete character or

selected text to the left

Using the Transcriber Transcriber is a handwriting recognition program that allows you to write in cursive, print, or mixed styles. It reliably recognizes not only written text but also numbers and symbols. Make sure to write legibly. See Help for more information on the Transcriber. To use the Transcriber:

1. Start an application that accepts user input, such as Notes or Word Mobile.

2. Tap the Input Panel arrow, then tap Transcriber. To write using Transcriber (using Notes):

1. Tap screen to position the cursor where you want the text to appear.

2. Use the stylus to write on the screen. The handwriting will be converted to text after you lift the stylus from the screen.

To edit text: 1. Draw a line across the text you want to edit. After you lift the stylus from the screen, the

line will disappear and the selected text will be highlighted. 2. You can now rewrite the text or use the Transcriber gestures to edit your selected text. See Help for the Transcriber gestures.

Input panel

Writing and drawing on the screen

You can write or draw directly on the screen and save notes in your own handwriting. If you prefer to use your own handwriting or use drawings in your notes, set the default input mode to Writing. If you prefer text, set the default mode to Typing.

To set the default input mode for Notes: 1. Tap Start > Programs > Notes. 2. From the Notes list, tap Menu > Options. 3. In the Default mode: box, tap the down arrow and select any of the following: ¢ Writing - if you want to draw or enter handwritten text in a note. e Typing - if you want to create a typed note. 4. Set the other options according to your preference.

5. Tap when finished. To write a note:

1. Tap Start > Programs > Notes. 2. From the Notes list, tap New. 3. Write your text on the screen.

4. When finished, tap to return to the Notes list.

Recording voice

At any time, whether your phone is on stand-by or active mode, you can record sound, voice, or add a recording to a note while using your device.

To create a voice recording:

Press and hold the Voice Commander button to begin

recording.

Press and hold to launch voice recorder

Or, you can follow the given steps: 1. Tap Start > Programs > Notes. 2. From the Notes list, tap New.

3. If you do not see the recording toolbar, tap Menu > View Recording Toolbar.

4. Tap the record icon to begin recording. 5. Place the receiver near your mouth or source of sound.

6. Tap the stop icon when finished recording. A recording icon appears on the note.

7. Tap a

To add a recording to a saved note: 1. Tap Start > Programs > Notes. 2. From the Notes list, tap to open a saved note. 3. If you do not see the recording toolbar, tap Menu > View Recording Toolbar. 4. Tap the record icon to begin recording. 5. Place the receiver near your mouth or source of sound.

6. Tap the stop icon when finished recording. A recording icon appears on the note.

7. Tap a.

Using ActiveSync

ActiveSync™ allows you to synchronize data in your device with data in your computer. ActiveSync can also synchronize over a wireless or cellular network with Microsoft Exchange Server, provided that your cellular phone service or company is running Microsoft Exchange Server with Exchange ActiveSync. When synchronized directly with Exchange Server, you can stay up to date even when your PC is turned off.

During synchronization, ActiveSync compares the data in your device with the data in your computer or Exchange Server, and updates all data with recent changes.

You can select and synchronize data in the following locations using ActiveSync: e Contacts e Calendar e Email e Tasks e Notes e Favorites e Files e Media You can also exchange data between your computer and device without synchronizing.

ActiveSync is already installed in your device, but before you can synchronize data with your computer, you must first install ActiveSync in your computer. Install ActiveSync from the Microsoft Getting Started CD that came with your device package.

After you have installed ActiveSync, set up a sync relationship between your device and your computer. ActiveSync recognizes your device and automatically transfers the synchronization settings you have in your device.

If you wish to synchronize your device with Exchange Server through your company or service provider, obtain the name of the Exchange Server, user name, password, and domain name from your network administrator before starting the Sync Setup Wizard.

To install and configure ActiveSync in your computer: 1. Insert the Microsoft Getting Started CD that came with your device package.

2. Follow succeeding screen instructions.

3. After the setup is complete, the Sync Setup Wizard automatically starts when you connect your device to your computer. Follow screen instructions to complete the wizard.

4. From the Sync Setup Wizard, you can: e Configure an Exchange Server connection to synchronize directly with an Exchange Server. Acquire from your network administrator the required parameters for input. e Create a synchronization relationship between your computer and your device. 5. Select the information type that you want to synchronize.

6. After you finish the wizard, ActiveSync automatically synchronizes your device. You can disconnect the device after the synchronization is complete.

NOTE: e When connected, your device is automatically synchronized with your computer. ActiveSync synchronizes everytime you make a change on either the device or computer. e You cannot use WLAN to synchronize database. e Refer to your Windows® Mobile Help, for more information about ActiveSync synchronization.

Synchronizing via mini-USB You can connect to your device using the bundled mini-USB cable to synchronize to your computer. To synchronize your device via mini-USB: 1. After installing ActiveSync to your computer, connect the mini-USB plug to the mini-USB connector at the bottom of the device.

2. Connect the other end of the USB cable to your computer. Upon connection, ActiveSync automatically synchronizes your device.

Synchronizing with Exchange Server

To synchronize your device with Exchange Server:

1. From the ActiveSync menu, tap Menu > Add Server Source. Scand raise Ucn aC

Umh cue, Pa Gen

Aihen ae e eA

Chern Die mia i po Goi ae

E L

P eu Loe ee rg d

eh Ertan r can seo i moe & : f

Lori bien Lonel 6 Bee fh

2. In the Server Address field, input the name of the server running Exchange ae derri REPR}

Server then tap Next. ]

Hi MAE Fe ee i ee Ge weiberas

If necessary, tap the check box k This server requires an encrypted Eiman wrerygceel (A)

(SSL) connection.

3. Input your name, password, and domain then tap Next.

4. Tap the check boxes to select the data items that you want to synchronize with Exchange Server. To change the available synchronization settings, select a data item then tap Settings. Tap Finish when done.

5. Start the sync process.

Setting the synchronization schedule To set the synchronization with Exchange Server:

1. From the ActiveSync screen, tap Menu > Schedule.

Im aim Select a shorter interval in the Peak times list. wee CC)

“peso [ig fon are . er Select As items arrive option or a longer interval [Dire p ing in the Off-peak times list.

M] Sedi nien in lah em While roaming Check Use above settings while roaming.

Sending messages Check Send outgoing items immediately.

bi ya er ee

Searching information

Using the search tool, you can search for files and other items stored in your device or the external MicroSD card. You can search by file name or by words located in various applications including the Calendar, Contacts, Excel Mobile, Word Mobile, Outlook Mobile, Help, Messages, Notes, and Tasks. You can also filter your search to files larger than 64 KB.

To search for a file or an item: 1. Tap Start > Programs > Search. 2. In Search for field, input the file name, word, or other information you want to search. 3. In Type field, select the data type to help you filter your search. 4. Tap Search. Found items are listed in Results. 5. In the Results list, tap the item with the information you need.

You can easily find Help for using any program on the device.

To get help for a program: e From the Today screen or program, tap Start > Help. A page will open with links to topics that explain how to use the program.

Hos de T, aa te Tel eer dibi agmini ahg aa d ee

Chapter

Phone features

e Using the phone e Making a call e Receiving a call

Using phone

Like a standard cellular phone, you can use your P526 to make and receive calls. You can also keep a history of calls made and received, send SMS or MMS messages, take notes while talking, call from Contacts, and copy data from installed SIM card to your device.

Phone pad

The phone pad allows you to easily dial and access the Contacts, Call History, Speed Dial, and Phone settings. To launch the Phone pad, do any of the following:

e Tap Start > Phone.

Y

e Press H.

Adjusting the volume To adjust the phone or device volume:

1. Tap „d£ from the status bar. 2. From the volume menu, you can:

e Move the slider to adjust device or phone volume.

e Tap On, Vibrate, or Off to change the system and ringer volume settings.

e Use the jog dial to adjust volume or set mode.

Making a call

You can make a phone call using the phone pad. You can also make calls directly from the Contacts, Call History, Speed Dial, or Voice Commander.

Using the alphanumeric keypad To make a call using the alphanumeric keypad: 1. Ensure the device is not on hold.

2. Input the number of the party you want to call then press Call key.

If you pressed the wrong number, press Clear key to erase number to the left.

3. Talk to the called party when connected. 4. When finished, press End key to end the call.

ee E

Press to call = 4 = Press to dialled number | Sees end call

Press to clear input to the left

Alphanumeric keypad

Phone pad features

ee ee oe i ee La

Dihallingiis

Displays the current call status irra se I

Press to mute

Press to launch Contacts list

Press to turn speaker ON/OFF Speaker Oh Moke Press to hold call

Press to take notes Press to end call

Poot re er a (7 init

Using Smart dialer

Smart Dialer utilizes the predefined alphabets or letters assigned to keys 2, 3, 4, 5, 6, 7, 8, and 9. Example: has letters a, b, and

c has d, e, f; and so on. Following

the sequence of keys pressed, Smart Dialer displays items from your Contacts or previous calls containing the alphabets of the pressed key.

As shown in the example, keys 3, 4, and 2 were pressed, so all items beginning with the letter d, e, or f; items whose second letter is g, h, or i; and items whose third letter is a, b, or c are displayed.

Making calls from Contacts To make a call directly from Contacts: 1. Press the Right Soft key or from the Today screen, tap Contacts. 2. You can do any of the following to make a call: e Tap name of contact, then from the Contacts screen, tap Call.

¢ Tap name of contact, then press | * |.

e You can also tap and hold the contact, and from the shortcut menu tap Call Work, Call Home, or Call Mobile.

e Tap Enter a name... then input the name or number you want to call from Contacts. Tap Call or press the Left Soft Key to dial the selected item.

Making calls from Call History To make a call from the call history: 1. Tap Start > Phone. 2. On the Phone pad, tap the Call History button.

3. Scroll to the desired contact or phone number, then tap Call. To look for more numbers in other categories, tap Menu > Filter and tap a category.

You can also launch Call History from the Today screen by pressing the Left Soft Key.

Call History button

Using the Speed Dial

With Speed Dial you can call frequently dialled numbers in a single press. For example, if you assign a contact to the number 2 button in Speed Dial, you can simply press and hold to dial the contact’s number.

To create a Speed Dial entry: 1. Make sure that the entry you want to create is already in the Contacts list. 2. Tap Start > Phone. 3. Tap the Speed Dial button on the Phone pad.

4. Tap Menu > New. 5. Tap a contact from the list then tap Select. 6. In the Location box, select an available key then tap OK.

To delete a Speed Dial entry: e In the Speed Dial list, tap and hold an entry then tap Delete.

Using Voice Commander To make a phone call using voice commander: 1. Press the Voice Commander button beside the Right Soft key.

2. From the following screen, your device asks you to “Say command.”

3. Audibly say “Call” then the name to call from your Contact list.

4. Say “Yes” or “No” after the confirmation question.

If you said “Yes”, the application proceeds and dials the number; otherwise, it returns to the Voice Commander menu.

. Say “Goodbye” or tap to exit Voice

Commander.

Press to launch Voice Commander

NOTES: To use Voice Commander while using a headset, press the answer button* on the headset then follow given instructions. (* Answer button may not be available in some headset models.)

Receiving a call

When you receive a Call, a message prompts and allows you to answer or reject the incoming call.

To answer or reject an incoming call: e To answer a call tap Answer, or press Call key.

e To reject an incoming call, tap Ignore, or press End key.

TIP: Press and hold Call key to switch receiver to speakerphone mode.

The following pop-up screen appears during an incoming call: e Tap Answer to receive call or e Tap Ignore to dismiss call.

To terminate a call: e Tap End or press End key to terminate an incoming or outgoing call.

Call key

| cr bd eben a fe Chena Potale ts aT Pe | Pi n < =o -s Fh fi r :

I ireann Call DEALA

Chapter Œ

Wireless features

e Using the Wireless Manager e Using Bluetooth® e Setting a GPRS connection

Using the Wireless Manager

The Wireless Manager allows you to enable or disable your wireless connections in a single location. This is a quick way to preserve battery power or to prepare your device for an airplane flight. To use the Wireless Manager:

. Tap Start > Settings > Connections tab.

. Tap Wireless Manager.

. From the Wireless Manager screen, do any of the following:

e Tap the button for a desired wireless connection type to turn it on or off. If it is already turned off, the button is a lighter color and displays an icon marked with an X.

e Tap to turn all wireless connections on or off.

e Tap Menu to change settings for one of the displayed wireless connection types.

G P Tap to turn all wireless Aa connections on or off

Tap to turn Bluetooth® [Bluetooth ch)

connection on or off

Tap to turn Phone connection on or off

Tap to exit Wireless Manager a Tap to change settings

4. Tap Done or |Pa’l to exit Wireless Manager.

Using Bluetooth®

Overview

Bluetooth® is a short-range wireless communications technology that allows devices with Bluetooth capabilities to exchange data within a radius of about 10 meters (30 feet) without requring a physical connection. With Bluetooth enabled in your device, you can:

e Connect and communicate (i.e. beam files, tasks, contacts) with other devices with Bluetooth features.

e Use Bluetooth service. After you connect to another device or computer using Bluetooth, you can use the services available on that device.

Activating Bluetooth in your device

Use the Wireless Manager to enable or disable Bluetooth in your device. You can access the Wireless Manager by performing any of the following:

1. Tap Start > Settings > Connections tab then tap the Wireless Manager icon. 2. From the Wireless Manager screen, tap Bluetooth.

You can also launch Wireless Manager from the Today screen by tapping the Wireless Manager icon.

= et

Pee aL

Tap to launch Wireless Manager

When not in use, deactivate Bluetooth in your device to conserve battery power.

Adding Bluetooth devices

. Make sure that Bluetooth is enabled on the device you want to add and the device is set as Discoverable. Sa ocr Ta a

. Tap Start > Settings > Connections then tap Bluetooth icon.

. Tap Add new device... to